How Do Top Drill Rig Companies Overcome Challenges?

Drill rig companies are telling us over and over again that a career in the oil rig industry is like no other. It is thrilling, lucrative, and, at the same time, it can also be painfully demanding.

Many people have tried their best to pursue a career in the oil field business before you, only to figure out later that they weren’t quite ready for the challenges ahead. 

oil industry

If you want to have a career in the oil rig space, how far do you think you can go to ensure the outcome of your efforts will be different than the outcome of most? 

Before anything else, you need to be aware of the dangers that are naturally intertwined with the lives of those who are working on an oil rig. However, awareness of those hazards is not enough. Of greater importance here is knowing how to stay cautious of what those risks are so as to remain safe. 

You’ll be prepared to undertake any challenge as it emerges once you’ve committed to this unique type of mindfulness and made common sense and safety a part of your daily routine.

Below, we have a good rundown on what to expect if you successfully landed a job in the oil rig industry.

Extreme Weather Conditions 

The oil rig is among the few work environments that are, without fibre of a doubt, hostile to human life. A typical oil rig can rise up to 40 storeys high above sea level. This explains the reason why it is in direct contact with so many of the world’s toughest weather conditions. 

Extreme weather conditions are one of the safety issues you need to contend if you will work in an oil rig facility. They usually require continuous monitoring because weather conditions are constantly changing at sea. 

Pressure Due to Work

Aboard oil rigs, there is a lot of pressure, both literal and figurative.  

The pressure, when you drill into the earth at a depth of, say, 2000 feet below ground, is a clear danger in and of itself. You will be working with some of the world’s largest, obviously heaviest machines. You might also deal with some of the most advanced pieces of equipment, designed and made to withstand harsh weather conditions.

To surmount such challenges, you must realize that you are a small but integral part of a bigger operation that impacts many lives and hundreds of kilometres of coastline. The environment, climate and regulatory pressures can change over the years, but common sense does not.

fuel industry

Fire Danger

Fire incidents are worse when they happen aboard oil rig facilities. Fires occurring at sea can quickly get out of control. If that happens, it will claim lives due to the remoteness of the site itself. Things are made worse by its proximity to the nearest medical and rescue facilities. 

You’d easily understand why fire incidents in the oil industry are serious mishaps if you are an industry insider yourself. One thing they will most likely put emphasis on is that safety, fire safety included, will begin with the working staff and the daily decisions that everyone makes, regardless if they are big or small. 

Limited Communication to the Outside World

Personnel assigned to oil rigs have little access to the outside world. With that being said, they need to live with the fact that they need to forgo contact with people (friends and loved ones) and this for an extended time (like from several months to a couple of years).

Should you find yourself seriously keen on embarking on a career in the oil rig space, this is one of the setbacks you need to get yourself ready for. 

Nevertheless, working in an oil rig comes with its own array of benefits and they naturally offset the perceived setbacks. Month-long vacations and holidays, as those experienced and attested to by the seasoned personnel, easily help even homesick team members power through their extraordinarily long working periods. 

Wrapping Up

If you look at those, all of the above would seem like a lot to take on, but drill rig companies say there is no insurmountable difficulty if you plan properly and prepare. 

Having safety and teamwork at the forefront of your mind will go a long way toward ensuring your safety when the time and opportunity comes that will force you to tackle each of the above-mentioned challenges.

How Drill Rig Companies Today Overcome Challenges?

oil rig industryRegardless if you are a seasoned professional in the drill rig industry, or if you have just embarked here and are trying to find your way around, building a career aboard a deep-sea oil rig will always be a balanced mix of fun, excitement, and challenge. 

Many people ahead of you have sought the same place under the sun here in this space, but unfortunately, they were not quite prepared for what lies ahead of them. Do you want to know what it takes to ensure that your experience here, in this industry, and with drill rig companies, will go differently? 

To begin with, you need to start out and commit yourself to remain here, despite possible setbacks ahead. One important factor that others ahead of you might have missed out getting ready for is being aware of the possible risks that lay ahead of them because they chose to work on an oil rig.

 If you will adopt this unique type of mindfulness, you will not have a hard time facing up the challenges that will surely rise for you along the way.  

Let us give you a quick rundown of what you can expect from the oil drill rig industry. We are also adding some quick refresher from the veterans themselves. This way you’ll have a good idea of how to beat certain challenges.  

Maintaining and Understanding  Complex Equipment

A little discernment here will let you see that the oil and the gas industry will not survive a single day if the people working behind it don’t possess a well-rounded skill-set and a cool head. 

Let us be honest here, oil rig machinery and equipment are indeed some of the most demanding pieces of machines that you will ever come across within your entire lifetime. 

And they are for a good reason. It is because they work in some of the most difficult or challenging environments that the world has known.  

Even when you know to yourself that you have good skills in a particular area, it is important that you test yourself out regularly. Ask for a hand or assistance on those areas where you see that you are lacking at.  

Harsh Weather Conditions

Compared to a typical oil rig, there are a handful of working environments that can be considered as naturally less hospitable for human life.

Usually, oil rigs would be rising at around 40-stories from the ocean. This explains the reason why we consider these areas high-risk work environments. 

The sheer location that oil rigs are in is putting them in harm’s way, particularly to some of the most fearsome weather conditions there is. 

oil platform rig

This is a matter of safety for everyone. It will necessitate constant attention and a keen eye to monitor changes in weather conditions. On a personal level, it is crucial also that you keep yourself prepared such as clothing choices.  

Pressure

The top oil drill rig companies in the country say that pressure in a figurative and literal sense is both very much alive and present when you work onboard an oil rig. The literal pressure that goes alongside regular drilling activities at a depth of 3,000 feet below is very much a real danger itself. 

You will be working with some of the most sophisticated and heaviest equipment of its kind. And they are particularly engineered and designed in such a way they can endure even the most extreme environmental stress.   

When it is about figurative pressures, they usually come from regulatory and governing bodies. With regard to the relative frequency of accidents and environmental incidents that takes place at sea aboard oil rigs — problems exacerbated by ocean pressures together with a handful of many other environmental factors — the creation and laying of extraction regulations for the oil industry are justifiably tight.  

Risk of Fire

Fire incidents aboard an oil rig are the worst-case scenario that we can imagine to possibly happen.

With respect to the remoteness of the location itself and the distance between the nearest medical and rescue facility, fires in the middle seas and oceans will take no time at all to grow fast and become out of hand. If the fire reaches that level, it will cost lives and leave out damage of unimaginable proportions.  

People working in the oil industry understand that the risk of fire is a serious matter. An oil company’s culture should not deal with it lightly because there is a huge amount of important things that are at stake here. 

Often, they will stress out that safety, fire risks including, should begin with everyone on board an oil rig together with the small decisions they need to make daily.  

What To Do With Drill Bit Problems According to Top Drill Rig Companies?

oil platform rigDrilling a perfect hole is easier said than done, and the top drill rig companies in the country agree to this. If you are not a professional in this area or don’t have any prior experience on this, engaging oneself in such an arduous, physically taxing undertaking can easily escalate, in no time, as a major problem. 

You grab yourself a suitable drill bit, and onto your drill press you will attach it, turn it on. Then, all along you are doing things great and good, and then in a snap, a slight thing goes wrong and everything about the hole you are drilling goes awry and far from being perfect.  

Drill rig companies are used to that and have found out some good and practical workaround in some of most complained about issues in the drill rig business. 

We have below a rundown of some of the most common issues anyone can encounter with their drill bit and ways on how you can avoid them.  

Broken Drill Bit

Everyone can experience this kind of problem when working on a drilling project. It is important to understand, though, that you will never be at fault here. There are a handful of underlying reasons why this issue can happen:

Frayed Corners

You can keep this problem from taking place if you will check your speed and at the same time also make sure you are using the right kind of coolant. The use of the wrong coolant will pave the way for an excessive run out while the drill is breaching the metal.  

Clogged Flutes with Chips

If you seriously want to shun this issue from happening to your drill bits, you can just opt to use ones that come with wider flutes, instead. Alternatively, you can also take out the drill bits at certain intervals. This will significantly help a lot in clearing the chips away. 

If the chips are not broken, you may consider the use of a chip breaker design or heavier feeds. Moreover, you can also try using polished flutes here.   

Excessive Feed 

We have but one easy workaround for this kind of concern, and that is to decelerate the feed.  

Too Dull Twist Drill

Before you commence any drilling work, consider checking out the drill bit first. There are times that you just need to give it some resharpening work. Or that it might be calling for some replacement part already. 

Drill bit slipping

Have a closer look at the chuck and see to it that it is holding tight your drill bit. Otherwise, you may just resort to using a drill bit with a shaft that comes with 3 flats. This allows you to have a better, more powerful grip on it, preventing it from slipping away.  

drilling tower

Damaged Point Angle

You will have this issue if you happen to hit the drill into the socket by virtue of the metal hammer. You can prevent this issue from happening by taking advantage of a soft lead instead, such as a plastic hammer. 

Be reminded also that you need to be extra careful not to mishandle the jobber drill.  

Too Large Hole

You may be using just the right size of the drill bit, however, if the issue is you have a hole that is either too large or too small, you may try the following suggestions:

  • Your drill point may be off-center. In such a case, replace or repoint it to enhance accuracy levels. 
  • Consider making tweaks to the machine spindle. It may not run the way that it did before or it is not rigid enough.  
  • Finally, tighten your work. 

Hole with rough edges

Drill rig companies say that nothing can be more disappointing when you have a hole with rough edges. You can prevent this kind of problem though by replacing the jobber drill.

The odds are high that the drill bit you are using here is dull already and that the ground point is incorrect. Also, make it a point that you will reduce the feed and that you are having a proper coolant for this purpose.